EPCOSProduct News
Below you find the latest product information updates to our Website.
MAY
May 9th, 2012
Here you find detailed information about TDK's MLCCs for Automotive, including product details, cap ranges, automotive qualification information as well as technical articles and application notes.
May 3rd, 2012
TDK's new "One Package SSD Module eSSD Series" is a SATA storage IC in which single-level cell (SLC) NAND flash memory and an advanced memory controller IC "GBDriver RS3" are combined in a single package in a ball grid array (BGA) format, using multi-chip packaging technology.
May 2nd, 2012
TDK's new advanced-spec SATA II-compatible SSD SDG3B Series for industrial applications incorporates the memory controller IC "GBDriver RS3 Series," an original in-house development of TDK, and features high-speed access with an effective speed of 190MB/s.
JULY
Jul 4th, 2011
New Tech Journal article:
Multilayer Technology Catching up to Wound Inductors
The increasingly multi-functional, high-level performance of electronic devices such as digital cameras, video cameras and laptop PCs is achieved through the use of ICs. Power is supplied to ICs from the DC-DC converter, which transforms the battery voltage into the IC’s drive voltage. However, variations in the power source voltage caused by switching at the DC-DC converter can spread to other circuits through the power source line as noise. Coils for decoupling are introduced into the power circuit as a preventative measure against this. Previously, the wound type coil was the most commonly used, but with the MLZ-H series, TDK has created a high-spec multilayer ferrite coil that threatens to overtake the wound coil. By employing our unique ferrite material and optimal layered structure we have vastly improved the rated current. We have also made it compatible with many circuits that were previously only compatible with the wound type coil.
Multilayer Technology Catching up to Wound Inductors
The increasingly multi-functional, high-level performance of electronic devices such as digital cameras, video cameras and laptop PCs is achieved through the use of ICs. Power is supplied to ICs from the DC-DC converter, which transforms the battery voltage into the IC’s drive voltage. However, variations in the power source voltage caused by switching at the DC-DC converter can spread to other circuits through the power source line as noise. Coils for decoupling are introduced into the power circuit as a preventative measure against this. Previously, the wound type coil was the most commonly used, but with the MLZ-H series, TDK has created a high-spec multilayer ferrite coil that threatens to overtake the wound coil. By employing our unique ferrite material and optimal layered structure we have vastly improved the rated current. We have also made it compatible with many circuits that were previously only compatible with the wound type coil.
MARCH
Mar 10th, 2011
New Tech Journal article:
Making a giant leap toward slimmer ferrite magnets
Magnet usage is considered a barometer of the maturity of industrial society. In recent years, rare-earth neodymium magnets have risen to the top of the market in terms of production value, but resource-abundant ferrite magnets continue to dominate the field in production volume. Thus, improving ferrite magnet performance can be the key to addressing many issues facing society as a whole, including energy-saving solutions, environmental concerns, and resource conservation. TDK has developed a new production method using FB12 material, which boasts some of the best properties in the world, to create a mass production technique for FB13B/FB14H high-performance thin-type anisotropic ferrite magnets that are only approximately 1.0 mm thick.
Making a giant leap toward slimmer ferrite magnets
Magnet usage is considered a barometer of the maturity of industrial society. In recent years, rare-earth neodymium magnets have risen to the top of the market in terms of production value, but resource-abundant ferrite magnets continue to dominate the field in production volume. Thus, improving ferrite magnet performance can be the key to addressing many issues facing society as a whole, including energy-saving solutions, environmental concerns, and resource conservation. TDK has developed a new production method using FB12 material, which boasts some of the best properties in the world, to create a mass production technique for FB13B/FB14H high-performance thin-type anisotropic ferrite magnets that are only approximately 1.0 mm thick.
JANUARY
Jan 10th, 2011
New Tech Journal article:
Extreme cold to searing heat, incessant exposure to strong vibrations and shocks, and many other adverse factors―electronic components in cars are subject to extremely harsh conditions and therefore need to provide much higher reliability than general- application products. Making full use of its rich store of advanced core technologies such as materials technology, multilayer technology, and sintering technology, TDK is offering a wide range of highly reliable multilayer ceramic chip capacitors for automotive use.
Extreme cold to searing heat, incessant exposure to strong vibrations and shocks, and many other adverse factors―electronic components in cars are subject to extremely harsh conditions and therefore need to provide much higher reliability than general- application products. Making full use of its rich store of advanced core technologies such as materials technology, multilayer technology, and sintering technology, TDK is offering a wide range of highly reliable multilayer ceramic chip capacitors for automotive use.
Jan 10th, 2011
New Tech Journal article:
A new method for producing neodymium magnets that takes dysprosium-saving to the extreme
Since they were commercialized in 1983, neodymium magnets (sintered neodymium-iron-boron magnet, TDK product name: NEOREC) have maintained their position as the most powerful type of magnet known to industry. Demand for these magnets continues to grow in many fields, for example actuators that drive magnetic heads on hard disk drives, motors used in industrial equipment and energy-saving appliances, and more recently in the drive motors used in HEVs and EVs
A new method for producing neodymium magnets that takes dysprosium-saving to the extreme
Since they were commercialized in 1983, neodymium magnets (sintered neodymium-iron-boron magnet, TDK product name: NEOREC) have maintained their position as the most powerful type of magnet known to industry. Demand for these magnets continues to grow in many fields, for example actuators that drive magnetic heads on hard disk drives, motors used in industrial equipment and energy-saving appliances, and more recently in the drive motors used in HEVs and EVs
OCTOBER
Oct 8th, 2010
TDK has launched Tech Journal.
TDK's online magazine for new products and technology news introducing information on market trends and develeopment background of new products.
TDK's online magazine for new products and technology news introducing information on market trends and develeopment background of new products.
OCTOBER
Oct 12th, 2009
TDK Components for Green Energy Applications
MAY
May 26th, 2009
TDK Electronics Europe today announced the introduction of the MMZ1005-E series, a family of three Gigaspira multilayer gigahertz-band chip bead inductors offering the world’s highest impedance in a 1005-size device.
Please see also Press Releases and Website News.
